Digital microscope allows large PCBs inspection in ergonomically correct working positions

November 22, 2018 // By Julien Happich
By incorporating a new lens and flex arm, compatible with the Tagarno FHD ZAP digital microscope solution, users are now able to be positioned directly in front of the camera, in an optimal working posture.

The new Flex arm inline and Lens +2 enable the operator to use the digital microscope with larger samples sized up to 600mm/23.62" in width with magnification levels from 0,8x up to 26,2x. This is made possible because of the distance from lens to object with a +2 lens and the fact that the solution is integrating both the camera head and monitor on a table mounted flexible arm, freeing a large amount of table space. The flexible part of the arm also enables the user to easily rotate and set the system completely aside from the working area if it is not in use.

Tagarno – www.tagarno.com  


Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.